“首页”的版本间的差异
（→LCPI） |
|||
| 第4行： | 第4行： | ||
|width="32%" valign="top" align="left"| | |width="32%" valign="top" align="left"| | ||
*[[LC-PI-200S]] | *[[LC-PI-200S]] | ||
| + | {| border="0" cellpadding="10" width="100%" | ||
| + | |- | ||
| + | |width="32%" valign="top" align="left"| | ||
| + | 扩展资料： | ||
| + | *[https://blog.csdn.net/GJF712/article/details/125156456 开发环境搭建] | ||
| + | *[https://blog.csdn.net/GJF712/article/details/125156044 windows驱动安装说明] | ||
| + | *[https://blog.csdn.net/GJF712/article/details/131586455 u-boot-2023.04移植、进行超频配置] | ||
| + | *[https://blog.csdn.net/GJF712/article/details/125251379 buildroot移植在RAM运行修改默认调试串口为uart1] | ||
| + | *[https://blog.csdn.net/GJF712/article/details/125213150 linux5.7.1移植在RAM运行修改默认调试串口为uart1] | ||
| + | *[https://blog.csdn.net/GJF712/article/details/125175264 u-boot nano-v2018.01移植在RAM运行修改默认调试串口为uart1] | ||
| + | *[https://blog.csdn.net/GJF712/article/details/126720236 驱动电阻屏触摸芯片ns2009(tsc2007),buildroot配置tslib] | ||
| + | *[https://blog.csdn.net/GJF712/article/details/126684441 开启I2C0] | ||
| + | *[https://blog.csdn.net/GJF712/article/details/126653378 挂载windows上的NFS服务器] | ||
| + | *[https://blog.csdn.net/GJF712/article/details/126574807 开启RNDIS，通过USB与电脑联网] | ||
| + | *[https://blog.csdn.net/GJF712/article/details/126446054 4.3寸(480*272)16位RGB565LCD屏驱动适配] | ||
| + | |width="32%" valign="top" align="left"| | ||
| + | |} | ||
| + | <div id="Products"></div> | ||
| + | |||
*[[LC-PI-H3]] | *[[LC-PI-H3]] | ||
*[[LC-PI-H6]] | *[[LC-PI-H6]] | ||
